| No. | Brand | b | M | a | L | h | H | N | J |
| CF18V | IKO | - | - | - | - | - | 287.337 mm | - | - |
| RNA4840 | IKO | - | - | - | - | - | 165.894 mm | - | - |
| BHAM88 | IKO | - | - | - | - | - | - | - | - |
| LRT505540 | IKO | - | - | - | - | - | - | - | - |
| CRY14V | IKO | - | - | - | - | - | - | - | - |
| RNA4828 | IKO | - | - | - | - | - | - | - | - |
| CF20-1VUU | IKO | - | - | - | - | - | - | - | - |
| WS80105 | IKO | - | - | - | - | 28.575 mm | - | - | - |
| LRT556325 | IKO | - | - | - | - | - | - | - | - |
| CRH8-1VBUUR | IKO | - | - | - | - | 47.625 mm | - | - | - |
| NART12R | IKO | - | - | - | - | - | - | - | - |
| CR36 | IKO | - | - | - | - | - | - | - | - |
| KT303513 | IKO | - | - | - | - | - | - | - | - |
| AZK7511011 | IKO | - | - | - | - | - | - | - | - |
| POS8A | IKO | - | - | - | - | - | - | - | - |
| CFE20-1BUU | IKO | - | - | - | - | - | - | - | - |
| BAM2412 | IKO | - | - | - | - | - | - | - | - |
| TLA1516Z | IKO | - | - | - | - | - | - | - | - |
| AS4565 | IKO | - | - | - | - | - | - | - | - |
| NAX7040 | IKO | - | - | - | - | - | - | - | - |
| LRT708060 | IKO | - | - | - | - | - | - | - | - |
| IKO NURT30 Cam Follower and Track Roller - Yoke Type | r1,2 min.:2.1 mm; Mass shaft washer:3.45 kg; d:90 mm; d1:190 mm; B:20 mm; |
| 0.787 Inch | 20 Millimeter x 1.063 Inch | 27 Millimeter x 1.181 Inch | 30 Millimeter IKO TA2030Z Needle Non Thrust Roller Bearings | Db2:112 mm; N4:4 mm; J:105 mm; Housing:FY 509 M/VZ033; L:137 mm; RG:1/4-28 UNF; Fatigue load limit Pu:0.915 kN; Housing material:Cast iron; B1:56.3 mm; Recommended tightening torque for grub screw:16.5 N·m; Size (mm):0.787 Inch | 20 Millimeter x 1.063 Inch | 27 Millimeter x 1.181 Inch | 30 Millimeter ; |
| 6.102 Inch | 155 Millimeter x 6.89 Inch | 175 Millimeter x 1.378 Inch | 35 Millimeter IKO RNA4828 Needle Non Thrust Roller Bearings | B:62.00 mm; Oil Speed Rating n2:5100 rpm; Basic Dynamic Radial Load Rating C:159000 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:146000 N; Fillet Radius rb:1.00 mm; D:130.0000 mm; d:60.000 mm; Grease Speed Rating n1:3900 rpm; Size (mm):6.102 Inch | 155 Millimeter x 6.89 Inch | 175 Millimeter x 1.378 Inch | 35 Millimeter ; |
| 1.496 Inch | 38 Millimeter x 2.047 Inch | 52 Millimeter x 1.181 Inch | 30 Millimeter IKO TR385230 Needle Non Thrust Roller Bearings | d3 max.:118.389 mm; G:89.586 mm; B:17.729 mm; d:90 mm; Threads per inch:12; Hydraulic nut:HMVC 18E; Lock washer:W 18; Sleeve:S 18x3.1/16; B4:19.863 mm; Lock nut:AN 18; Size (mm):1.496 Inch | 38 Millimeter x 2.047 Inch | 52 Millimeter x 1.181 Inch | 30 Millimeter ; |
| IKO CRH44VBUUR Cam Follower and Track Roller - Stud Type | B:35 mm; d2 max.:114 mm; Mass rod end:3.9 kg; C1 max.:31 mm; Material constant KM:330; G:M 52x3; l1 min.:110 mm; Basic static load rating C0:245 kN; Specific dynamic load factor K:100 N/mm²; α:6 °; |
| IKO CF18V Cam Follower and Track Roller - Stud Type | ba:59.531 mm; J min.:371.475 mm; Bearing:23032 CCK/W33; H:287.337 mm; Bearing limiting speed:3000 r/min; A2:206.375 mm; R2:36.513 mm; Cap bolt, SAE grade:8; A1:133.35 mm; P90°:113 kN; |
| 2.559 Inch | 65 Millimeter x 3.228 Inch | 82 Millimeter x 0.984 Inch | 25 Millimeter IKO RNA49/58 Needle Non Thrust Roller Bearings | PG:1/8 NPT; RG:1/8 NPT; P60°:42.3 kN; Lock washer:W 12; Appropriate attachment bolt size G:0.5 in; Cap bolt:2 x 1/2-13 UNC; J min.:219.075 mm; Bearing:22312 E; N1:15.875 mm; Lock nut:N 12; Size (mm):2.559 Inch | 65 Millimeter x 3.228 Inch | 82 Millimeter x 0.984 Inch | 25 Millimeter ; |
| IKO POS 8 LA Spherical Plain Bearings - Rod Ends | D:240 mm; B:55 mm; r1s (min):4 mm; Static (Coa):447 kN; b1:mm; Dynamic (Ca):430 kN; F:134 mm; d2 (max):mm; d2:95 mm; b:mm; |
| IKO CFE20-1BUU Cam Follower and Track Roller - Stud Type | Accessories:Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:83200 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Oil Speed Rating n2:5000 rpm; Grease Speed Rating Open/Shielded n1:4300 rpm; D:150.0000 mm; Basic Static Radial Load Rating Co:64000 N; B:28.00 mm; Grease Speed Rating n1:4300 rpm; |
| IKO CF20-1BR Cam Follower and Track Roller - Stud Type | Oil Speed Rating n2:3600 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Grease Speed Rating n1:3000 rpm; Basic Dynamic Radial Load Rating C:174000 N; Fillet Radius ra:2.50 mm; D:215.0000 mm; Sealed Speed Rating n3:2100 rpm; Basic Static Radial Load Rating Co:140000 N; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:3600 rpm; |
| IKO AZK16027015 Thrust Roller Bearing | H1:35 mm; Angle between holes in outer ring (Pitch) α:45 °; d:60 mm; r3,4 min.:0.6 mm; H:45 mm; D:145 mm; Frictional moment:1 N·m; Mass bearing:4.1 kg; Basic dynamic load rating C:90 kN; Attainable speed:3000 r/min; |
| 1 Inch | 25.4 Millimeter x 1.313 Inch | 33.35 Millimeter x 1 Inch | 25.4 Millimeter IKO BHAM1616 Needle Non Thrust Roller Bearings | Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; Tolerance shaft:h8; Coefficient of friction µ max.:0.08; Specific static load factor K0:200 N/mm²; Specific dynamic load factor K:140 N/mm²; D:75 mm; Coefficient of friction µ min.:0.03; Mass bushing:0.1 kg; Tolerance housing:H7; Size (mm):1 Inch | 25.4 Millimeter x 1.313 Inch | 33.35 Millimeter x 1 Inch | 25.4 Millimeter ; |
| IKO POSB6 Spherical Plain Bearings - Rod Ends | J max.:279.4 mm; A1:88.9 mm; h:31.75 mm; N1:22.225 mm; H:169.863 mm; End plug (suffix Y):EPR 8; Labyrinth ring:2 x LOR 45; H2:31.75 mm; Ca:42.799 mm; Bearing limiting speed:6000 r/min; |
| IKO CFS2.5 Cam Follower and Track Roller - Stud Type | L:96 mm; d2:57 mm; Da:88.9 mm; N:14.8 mm; A:35 mm; H:156 mm; Recommended tightening torque for grub screw:7.4 N·m; A3:3.2 mm; Housing:FYTBK 507; Housing material:Composite; |
| 1.772 Inch | 45 Millimeter x 1.969 Inch | 50 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ455030 Needle Non Thrust Roller Bearings | B:50.00 mm; d:45.000 mm; Oil Speed Rating n2:6600 rpm; Basic Static Radial Load Rating Co:75000 N; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:85200 N; Grease Speed Rating n1:5100 rpm; Fillet Radius ra:1.50 mm; D:100.0000 mm; Size (mm):1.772 Inch | 45 Millimeter x 1.969 Inch | 50 Millimeter x 1.201 Inch | 30.5 Millimeter ; |
| IKO WS80105 Thrust Roller Bearing | h:28.575 mm; Adapter sleeve assembly:SNW 15x2.1/2; Cap bolt:2 x 1/2-13 UNC; Max. speed for Taconite seal:1250 r/min; Pa:6.67 kN; J1:47.625 mm; P150°:18.2 kN; PG:1/8 NPT; J min.:219.075 mm; P60°:54.3 kN; |
IKO NAST15ZZUUR Cam Follower and Track Roller - Yoke Type Video
Bearings & Bushings NEW IKO NAST15ZZUUR CAM
Find many great new & used options and get the best deals for NEW IKO NAST15ZZUUR CAM FOLLOWER BEARING at the best online prices at , Free shipping
NAST15ZZUUR | Cam Follower and Track Roller - Yoke Type
NAST15ZZUUR CAM FOLLOWER BEARING ; 15MM BORE 35MM RLR DIA ... IKO. Manufacturer Name. IKO. Minimum Buy Quantity. N/A. Weight / Kilogram
IKO Roller Followers (NAST15ZZUUR): Cam Yoke Roller
THIS LISTING IS FOR ( 1 ) - IKO NAST15ZZUUR Thrust Needle roller bearing, Roller Follower, UPC: 4549557044670, FACTORY NEW!
NEW IKO NAST15ZZUUR CAM FOLLOWER BEARING
Find many great new & used options and get the best deals for NEW IKO NAST15ZZUUR CAM FOLLOWER BEARING at the best online prices at ! Free shipping
IKO Separable Roller Follower- Metric, NAST15ZZUUR
IKO Separable Roller Follower- Metric, NAST15ZZUUR, Crowned OD, Double Sealed, 15 mm Bore, 35 mm OD. Buy it and Save at GLOBALindustrial.com
IKO NAST15ZZUUR - idc-store
IKO NAST15ZZUUR, IKO, IKO CAM FOLLOWER, IKO NAST SERIES CAM FOLLOWER, IKO NAST, CAM FOLLOWER, CAM FOLLOWERS
IKO NAST15ZZUUR Thrust Needle roller bearing, Roller
Find many great new & used options and get the best deals for IKO NAST15ZZUUR Thrust Needle roller bearing, Roller Follower FACTORY NEW! at the best