| IKO CR36 Cam Follower and Track Roller - Stud Type | Fillet Radius ra:2.00 mm; D:200.0000 mm; Basic Dynamic Radial Load Rating C:203000 N; Sealed Speed Rating n3:1600 rpm; d:110.000 mm; Grease Speed Rating n1:1600 rpm; Oil Speed Rating n2:2600 rpm; Basic Static Radial Load Rating Co:200000 N; Accessories:Shield & Seal & Snap; B:69.80 mm; |
| IKO WS3562 Thrust Roller Bearing | ra max.:3 mm; da min.:147 mm; Reference speed:2400 r/min; da max.:163 mm; Mass bearing:18.8 kg; D:280 mm; r1,2 min.:4 mm; s max.:3.7 mm; Axial load factor Y:0.6; F:167 mm; |
| IKO CFSFU-20-1 Cam Follower and Track Roller - Stud Type | d:110 mm; B1:110.185 mm; Lock washer:W 22; B4:23.012 mm; Hydraulic nut:HMVC 22E; Mass adapter sleeve assembly:2.95 kg; G:109.855 mm; Sleeve:S 122x4; Lock nut:AN 22; Threads per inch:12; |
| IKO AZK16027015 Thrust Roller Bearing | H1:35 mm; Angle between holes in outer ring (Pitch) α:45 °; d:60 mm; r3,4 min.:0.6 mm; H:45 mm; D:145 mm; Frictional moment:1 N·m; Mass bearing:4.1 kg; Basic dynamic load rating C:90 kN; Attainable speed:3000 r/min; |
| IKO CR16VUUR Cam Follower and Track Roller - Stud Type | Frame Size A:3 3/4 in; Bolt Pattern C:0.55 in; Frame Size B:11 in; Height G:2.563 in; Bolt Pattern E:9 in; Shaft C/L Distance F:1 2/5 in; Bolt Pattern D:1 3/4 in; Frame Accepts These Shaft Sizes (Bearing Bore):20 mm, 25 mm; Travel:6; |
| 1.772 Inch | 45 Millimeter x 1.969 Inch | 50 Millimeter x 1.201 Inch | 30.5 Millimeter IKO IRT4530 Needle Non Thrust Roller Bearings | H:54 mm; Attainable speed:1700 r/min; N:11 mm; Fatigue load limit Pu:10 kN; r1,2 min.:0.6 mm; r3,4 min.:0.6 mm; Basic dynamic load rating C:122 kN; Angle between bolts and thread holes α/2:15 °; Angle between holes in outer ring (Pitch) α:30 °; Static moment stiffness:1530 N·m/mrad; Size (mm):1.772 Inch | 45 Millimeter x 1.969 Inch | 50 Millimeter x 1.201 Inch | 30.5 Millimeter ; |
| IKO CRH40VB Cam Follower and Track Roller - Stud Type | d:130.000 mm; Basic Dynamic Radial Load Rating C:225000 N; Basic Static Radial Load Rating Co:300000 N; Fillet Radius rb:1.00 mm; D:200.0000 mm; Oil Speed Rating n2:8800 rpm; Grease Speed Rating n1:5900 rpm; Fillet Radius ra:2.00 mm; B:66.00 mm; |
| IKO CF16VBUU Cam Follower and Track Roller - Stud Type | Grease Speed Rating Open/Shielded n1:5000 rpm; Basic Static Radial Load Rating Co:21200 N; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:6000 rpm; D:120.0000 mm; d:95.000 mm; B:13.00 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:19900 N; Sealed Speed Rating n3:3000 rpm; |
| IKO NAST17ZZR Cam Follower and Track Roller - Yoke Type | H:99 mm; Mass bearing unit:1.8 kg; Thread grub screw G2:M6; Bearing:YSPAG 208; J7:17 mm; Housing material:Cast iron; N:24.5 mm; Recommended diameter for attachment bolts, mm G:12 mm; J:135.5 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
| IKO CF20-1VUU Cam Follower and Track Roller - Stud Type | D:52 mm; r min.:0.8 mm; Basic dynamic load rating C:44 kN; Radial shaft seal with a low cross-sectional height, single lip:G 45x52x4; Limiting speed:5600 r/min; C:25 mm; Basic static load rating C0:140 kN; Radial shaft seal with a low cross-sectional height, double lip:SD 45x52x4; Reference speed:4500 r/min; Fw:45 mm; |
| 2.559 Inch | 65 Millimeter x 3.228 Inch | 82 Millimeter x 0.984 Inch | 25 Millimeter IKO RNA49/58 Needle Non Thrust Roller Bearings | PG:1/8 NPT; RG:1/8 NPT; P60°:42.3 kN; Lock washer:W 12; Appropriate attachment bolt size G:0.5 in; Cap bolt:2 x 1/2-13 UNC; J min.:219.075 mm; Bearing:22312 E; N1:15.875 mm; Lock nut:N 12; Size (mm):2.559 Inch | 65 Millimeter x 3.228 Inch | 82 Millimeter x 0.984 Inch | 25 Millimeter ; |
| IKO CF20-1V Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:70200 N; Grease Speed Rating n1:3800 rpm; d:60.000 mm; D:110.0000 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3800 rpm; Basic Static Radial Load Rating Co:58500 N; B:36.50 mm; Accessories:Two Shields & Snap-R; Oil Speed Rating n2:5000 rpm; |
| IKO CRH44VBUU Cam Follower and Track Roller - Stud Type | G2:G 1/4; G:Tr 900x7; Mass withdrawal sleeve:368 kg; G1:60 mm; A:15 mm; B1:560 mm; Nut for removal:HM 31/900; B2:600 mm; Hydraulic nut:HMV 180 E; d1:800 mm; |
| IKO CR14B Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:19300 N; Oil Speed Rating Open/Shielded n2:11000 rpm; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; d:25.000 mm; Basic Dynamic Radial Load Rating C:35800 N; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:6400 rpm; D:80.0000 mm; B:21.00 mm; |
| IKO CFE 20-1 Cam Follower and Track Roller - Stud Type | da max.:43.2 mm; Basic dynamic load rating C:14.8 kN; Calculation factor f2B:1.02; Static axial stiffness, preload class D:211 N/µm; rb max.:0.3 mm; Calculation factor f1:0.99; Static axial stiffness, preload class C:160 N/µm; a:18.5 mm; Preload class C GC:360 N; Calculation factor f2D:1.08; |
| IKO CFRU1-6 Cam Follower and Track Roller - Stud Type | Lock nut:AN 18; Bearing limiting speed:5300 r/min; R2:27.781 mm; Appropriate attachment bolt size G:0.625 in; P150°:54.3 kN; N1:19.05 mm; Pa:41.8 kN; Lock washer:W 18; Housing:FSAFS 218; Mass pillow block:29 kg; |